神马品牌网澳门永利高老品牌信:哪位大侠能帮我翻译一下
来源：百度文库 编辑：神马品牌网 时间：2024/04/27 18:22:21
是空调方面的哦。多谢。
Pipe installation must be carried out in accordance
with current norms and directives. The heat pump can
operate up to a return temperature of about 58* °C
and an outgoing temperature of about 70* °C from the
heat pump. The compressor produces up to 65* °C,
the rest is obtained using additional heating.
* Applies to 5 kW 1-phase, 6 kW 3-phase 3 x 400 V, 8
kW 3-phase 3 x 400 V and 10 kW 3-phase 3 x 400 V.
The other heat pumps has a max return temperature
of approximately 50 °C and an outgoing max temperature
from the heat pump of approximately 60 °C.
Since the FIGHTER 1220 is not fitted with shut-off
valves, these must be fitted outside of the heat pump
to make future servicing easier.
During assembly of FLM the pipes for the heat medium
and water heater and possibly hot water circulation
are routed backwards. The distance between
FIGHTER 1220 and the wall ought to be 50 mm.
Pipe installation must be carried out in accordance
with current norms and directives. The heat pump can
operate up to a return temperature of about 58* °C
and an outgoing temperature of about 70* °C from the
heat pump. The compressor produces up to 65* °C,
the rest is obtained using additional heating.
* Applies to 5 kW 1-phase, 6 kW 3-phase 3 x 400 V, 8
kW 3-phase 3 x 400 V and 10 kW 3-phase 3 x 400 V.
The other heat pumps has a max return temperature
of approximately 50 °C and an outgoing max temperature
from the heat pump of approximately 60 °C.
Since the FIGHTER 1220 is not fitted with shut-off
valves, these must be fitted outside of the heat pump
to make future servicing easier.
During assembly of FLM the pipes for the heat medium
and water heater and possibly hot water circulation
are routed backwards. The distance between
FIGHTER 1220 and the wall ought to be 50 mm.
以管输送安装一定是在一致中实行
藉由现在的基准和指令。 热邦浦罐子
直到约 58* ° C 的回行温度操作
而且约 70* ° C 的好交际的温度从那
热邦浦。 压缩物直到 65* ° C 生产,
其馀者被获得使用附加的暖气。
*适用於 5 千瓦 1 个时期的,6 千瓦 3 个时期的 3 x 400 V,8
千瓦 3 个时期的 3 x 400 V 和 10 千瓦 3 个时期的 3 x 400 V。
另一个热邦浦有最大回返温度
大约 50 ° C 和好交际的最大温度
从大约 60 ° C 的热邦浦。
自斗士 1220 以后不与～一起适合关闭的- 走开
活瓣, 这些在热邦浦的外面一定被适合
使将来的修护更容易。
在 FLM 的集会管的时候为热媒体
而且水加热器和可能地热的水循环
向后被溃败。 距离在
斗士 1220 和墙壁应该是 50 mm。
道安装必须按照开展 目前规范和指示. 热力泵可以 操作温度恢复到约58度*C 卸任和温度约70度*从C 高温泵. 压缩机的生产比重达65*C 其余获得更多取暖用. 九龙西1-5适用期6截停三相400VX3、8 千瓦三相310VX400截停三相340VX 另外有热水泵温度恢复马克斯 约50度的温度C、卸任马克斯 来自约600C高温泵 自1220战机配备并非关闭 阀门,必须安装外热水泵 未来服务提供方便. 在组装的热管中的FLM 热水器、热水循环,并可能 倒退路线. 距离 1220战斗机和50毫米的墙应.