神马品牌网张忠良一江春水向东流:WindowsXP安装是出错了！！！
来源：百度文库 编辑：神马品牌网 时间：2024/05/10 08:58:41
安装XP到加载信息文件后出现蓝屏：
A problem has been detected and windows has been shut down to prevert damage to your computer.
SESSION3_INITIALIZATION_FAILED
If this is the first time you have seen this Stop error screen,restart your computer.If this screen appears again,follow these steps;
Check to make sure any new hardware or software is properly installed.If this is a new installation,ask your hardware or software manufacturer for any Windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode.
Technical information:
*** STOP: 0*0000006F (0*C0000020,0*00000000,0*00000000,0*00000000)
这是怎么回事啊？？？？？
是在别人家的时候有这个，我自己安时没有问题,所以应该不是盘坏了
希望能得到具体解决方法
A problem has been detected and windows has been shut down to prevert damage to your computer.
SESSION3_INITIALIZATION_FAILED
If this is the first time you have seen this Stop error screen,restart your computer.If this screen appears again,follow these steps;
Check to make sure any new hardware or software is properly installed.If this is a new installation,ask your hardware or software manufacturer for any Windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options,and then select Safe Mode.
Technical information:
*** STOP: 0*0000006F (0*C0000020,0*00000000,0*00000000,0*00000000)
这是怎么回事啊？？？？？
是在别人家的时候有这个，我自己安时没有问题,所以应该不是盘坏了
希望能得到具体解决方法
这是由于你安装了新的硬件或者软件造成的系统内部冲突，有可能是主板BIOS程序被删除了，有可能是新的软件不兼容造成的，进入安全模式删除就可以，还可以使用windows系统盘进行修复
装系统的时候出现这种蓝屏提示是经常的事。问题出在哪里？十之八九是内存条。你可以做这样2件事：
1.看看机子里有几根内存条，只留下一根最大的，其它的都拔下来，待系统装好了之后再还原。
2.把留下的这根内存条的金手指擦一擦，再插上去，要插在最里边的槽位里，一定要插紧。
检查确定，任何的新硬件或软件适当地被安装。因为任何的窗口更新你可能需要，如果这是一个新的安装, 问你的硬件或软件制造业者。
如果问题继续, 失去能力或除去任何的崭新安装了硬件或软件。使BIOS记忆选项 , 像是贮藏或遮蔽失去能力。如果你需要使用安全的模态除去或使成份失去能力,重新开始你的计算机,压 F8 选择先进的启始选项, 然后选择安全的模态。
一般来说，0×0000006F是盘坏了。
换个盘
光盘有损伤或刻录盘文件有问题，换一张盘安装。