五官不立体适合短发吗:请帮我把这段电脑译过的整理成规范的中文

CMG喜万嘉的加工与普通木工无异。熟练木工师傅只需略加指点即可上手

裁切：直线或曲线截切，使用切割机便可完成。

开孔：用电钻及切割机可完成水喉位、管线位、水槽
或洗面盆及嵌入式炉具等的开孔

修边：所有边线可用木工修边机完成，只需更换不同
的刀头、各款边饰立即变为现实。

粘合：使用人造石粘合剂可实现板材、镶边、挡水、
面盆、水槽等的粘合，同色的粘 合剂使接缝不易察觉。

打磨：可用砂光机或手工打磨，用240号、400号、
800-1200号水砂纸逐级打磨即可。

抛光：将板面全部打磨至平滑，使用抛光机打上适量的
腊。进行抛光，可使板面光亮 如镜。
The CMG happy Wan Jia processing and the ordinary carpentry do not have differently. Skilled carpentry skilled worker only must direct slightly then begins
Dinking die: The straight line or the curve truncation cut, uses the cutter then to be possible to complete.

Opens the hole: May complete the water jugal, the tube hairs breadth, the water trough with the electric drill and the cutter
Or washes the basin and inserts the type furnace and furnace accessories and so on to open the hole

Trimming: All sidelines may use the carpentry bording machine to complete, only must replace differently
The tool bit, each section list become the reality immediately.

Agglutination: The use artificial stone bond may realize the plate, border, keeps off the water,
The basin, the water trough and so on the agglutination, the homochromy bond causes the joint not to be easy to realize.

Polishes: May use the polishing machine or manually polishes, with 240, 400,
800-1200 water sandpaper polishes by the level then.

Polishes: Polishes completely the pan to is smooth, uses the buffing machine to get right amount
Sacrificial. Carries on polishes, may cause the pan luminous like mirror.
是整理成规范的英文，写错了。