神马品牌网水泥石英砂废料:怎样用vb读取文本文件
来源：百度文库 编辑：神马品牌网 时间：2024/05/06 04:02:35
Pinging 172.18.60.53 with 32 bytes of data:
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Ping statistics for 172.18.60.53:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
我想用vb读取以上这个文件，并判断当received=0时，返回一个提示
请帮我写下详细过程代码
就是想判断下当received=0时，返回一个提示,received怎么判断啊能写详细点啊，还有ssss是表示什么啊
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Reply from 172.18.60.53: bytes=32 time<10ms TTL=127
Ping statistics for 172.18.60.53:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
我想用vb读取以上这个文件，并判断当received=0时，返回一个提示
请帮我写下详细过程代码
就是想判断下当received=0时，返回一个提示,received怎么判断啊能写详细点啊，还有ssss是表示什么啊
Open "文件路径" For Input As #1
Do Until EOF(1)
Line Input #1, ssss
tt = tt & ssss 'tt就是文件的内容
Loop
'利用查找received=得到这些字母的位置。然后用left,right.等等来判断后面是不是0
Close #1