2978游戏可以赢钱吗:虚拟局域网的组网方法

来源:百度文库 编辑:神马品牌网 时间:2024/04/25 17:26:03
边个高手能帮忙一下啊!!速回~~

把交换机的端口划分到不同的vlan里就可以了 以cisco的交换机为例子

VLAN配置
2900XL VLAN config

--------------------------------------------------------------------------------

Switch# vlan database
Switch(vlan)# vtp domain domain-name

Switch(vlan)# vtp domain domain-name password password-value

Switch(vlan)# vtp server

Switch(vlan)# show vtp status

若想Disable VTP,只须将VTP模式改为transparent

即Switch(vlan)# vtp transparent

2. 激活VTP V2(交换机默认的是VTP V1)。

Switch# vlan database

Switch(vlan)# vtp v2-mode

Switch# show vtp status

3. 增加VLAN。Catalyst 2900XL系列交换机最大支持64个激活的VLAN,

VLAN ID 号从1-1005。

Switch# vlan database

Switch(vlan)# vlan vlan-id name vlan-name

Switch# show vlan name vlan-name

Switch(vlan)# no vlan vlan-id //删除VLAN

4. 将端口加入VLAN。

Switch# configure terminal

Switch(config)# interface interface

Switch(config-if)# switchport mode access

Switch(config-if)# switchport access vlan vlan-id

Switch(config-if)# show interface interface-id switchport

5. 配置trunk 端口。

Switch# configure terminal

Switch(config)# interface interface

Switch(config-if)# switchport mode trunk

Switch(config-if)# switchport trunk encapsulation isl

Switch(config-if)# end

Switch# show interface interface switchport

Switch# copy running-config startup-config

6. 配置trunk 上允许的VLAN。

Switch(config)# interface interface

Switch(config-if)# switchport mode trunk

Switch(config-if)# switchport trunk allowed vlan remove vlan-id-range

Switch(config-if)# switchport trunk allowed vlan add vlan-id-range

Switch(config-if)# end

Switch# show interface interface switchport allowed-vlan

若想取消trunk端口,只需

Switch(config-if)# no switchport mode

7. 使用STP实现负载。

实现负载分担有两种方法:

1) 使用端口优先级。

配置:

Switch_1(config-if)# interface fa0/1

Switch_1(config-if)# spanning-tree vlan 8 9 10 port-priority 10

Switch_1(config)# interface fa0/2

Switch_1(config-if)# spanning-tree vlan 3 4 5 6 port-priority 10

2) 使用路径值。例如:

Switch_1(config)# interface fa0/1

Switch_1(config-if)# spanning-tree vlan 2 3 4 cost 30

Switch_1(config)# interface fa0/2

Switch_1(config-if)# spanning-tree vlan 8 9 10 cost 30